成都附近有没有服务

Welcome to Qingdao Dongquan environmental protection equipment Co., Ltd.

Source manufacturer of environmental protection dust remover

To provide you with satisfactory dust removal solutions

eighteen billion six hundred and sixty-one million six hundred and fifty-nine thousand two hundred and twenty-eight
0532-86151365

What are the advantages of the blowback device designed by the duster manufacturer? [2020-06-15]
Back blowing of sub chamber: the structure of dust remover produced by dust remover manufacturer adopts compartment structure. The valve switches the air flow through the chamber and forces the bag to contract or bulge
The resistance of the whole machine will increase after the pulse dust collector is used for a long time [2020-06-15]
Pulse dust remover in the process of processing will cause water in the pipeline, so that the lower part of the water tank will also ponding, this problem will lead to wet compressed air blowing into
Design concept of dust collector [2020-06-14]
Reasonable planning is the condition to ensure the life of filter bag, but in the process of dust collector planning, too much attention is paid to various economic indicators, and it is easy to ignore the filter chamber box
Application field of dust collector [2020-06-14]
In order to reduce the air pollution and maintain the atmospheric environment, the Chinese government pays more and more attention to the environmental protection, and the investment in environmental protection is rising
The system uses valves to open and close automatically [2020-06-13]
Combustible dust accumulated in the filter bag or box: do not let air leak into the pulse dust collector. When you need to open the shell, please cool it thoroughly or use it
The resistance of the whole machine will increase after the dust collector is used for a long time [2020-06-13]
After the dust collector is used for a long time, the resistance of the whole machine will increase. In practice, this problem may occur due to the long distance of blowing time. Because of different workers
The dust collector cleans the polluted air with compressed air [2020-06-12]
Start the dust remover ash conveying equipment and start to unload the ash hopper from the back to the front in order. When the hopper water level drops to a lower level, the ash conveying equipment
The use of high-quality movement in the pulse precipitator does not mean that it is safe [2020-06-12]
Any type of pulse dust collector in the use process will have some security risks, but if you can correctly operate, pulse dust collector equipment can try to
There is a big pressure difference between the inside and outside of the precipitator, and the leakage of flange or welding joint will occur in long-term operation [2020-06-11]
The sedimentation cover and baffle of the dust collector are worn or cracked. In order to avoid the direct impact of air flow on the filter bag or shell, the small dust collector is usually equipped with sedimentation
If the elastic expansion ring of the filter bag mouth is not close to the flower plate hole, there will be a gap [2020-06-11]
The pulse bag of the new dust remover has large pore volume. At the beginning of use, the dust passing rate is high, and the filter condition is not yet up to
If the filter bag destroys the discharge of the precipitator, it will be unqualified and seriously affect the environment [2020-06-10]
The dust remover is a dry and efficient dust collector. According to its different cleaning methods, it can be divided into: vibration type, gas ring back blowing type, pulse type, acoustic wave type and compound
The dust catcher manufacturer should do a good job in removing the ignition source [2020-06-10]
Dust remover manufacturers to do a good job in the removal of ignition sources: ignition source eradication operation to take three measures. First of all, with regard to the ignition source caused by an external fire source
contact us
Qingdao dongquanshun environmental protection equipment Co., Ltd

Contact information: 18661659228

Toll free: 0532-86151365

Email:13573885268@163.com

Website: http://www.dongqunshun.cn

Address: No.237, Haixi Road, West Coast new area, Qingdao, Shandong Province