成都附近有没有服务

Welcome to Qingdao Dongquan environmental protection equipment Co., Ltd.

Source manufacturer of environmental protection dust remover

To provide you with satisfactory dust removal solutions

eighteen billion six hundred and sixty-one million six hundred and fifty-nine thousand two hundred and twenty-eight
0532-86151365

Current location: homepage > News and information > Company news >

Matters needing attention in dust collector installation

Article source: this site Author: admin popularity: second Time: September 8, 2020 11:21【 large in Small

a duster Pay attention to the following 9 points during installation:

When the dust collector is stored, it should be kept away from the fire source to prevent moisture, direct sunlight and heavy objects from squeezing. The efficiency of the dust collector can be expressed by the gas loss of the dust remover. Cartridge filter The dust collector is composed of filter element or pulse injection. According to the installation methods, the cartridge dust remover can be divided into inclined plug-in type, side mounted type, hoisting type and top mounted type. According to the material of the filter cartridge, the filter cartridge dust remover can be divided into long fiber polyester filter cartridge dust collector, composite fiber cartridge dust collector, anti-static cartridge dust collector, flame retardant cartridge dust collector, membrane filter cartridge dust collector, nano cartridge dust collector, etc. Check each filter bag before installation to prevent mechanical damage. The dust collector is composed of filter element or pulse jet. According to the installation methods, the cartridge dust remover can be divided into inclined plug-in type, side mounted type, hoisting type and top mounted type. According to the material of the filter cartridge, the filter cartridge dust remover can be divided into long fiber polyester filter cartridge dust collector, composite fiber cartridge dust collector, anti-static cartridge dust collector, flame retardant cartridge dust collector, membrane filter cartridge dust collector, nano cartridge dust collector, etc.

2. The installation should be simple, and the bag should be clean. Cigarettes, matches, lighters, keys, knives and other items should not be carried to avoid falling into the filter bag. (if the packet falls into fragments, it must be removed). Shoes with hard soles are allowed. Staff package installation fixed, fixed location, accountability, each for their own dust collector installation notes, and sign the log.

3. The design requirements of installation working environment: the lighting on the installation site is sufficient, and it is not allowed to store the instruments and sundries irrelevant to the installation.

4. It is forbidden to smoke in the process of installation. In any form, welding and cutting any part of the work. It is forbidden to use lighters, matches, etc. for lighting in case of power failure. The installation tools shall be installed at the end of installation on working days to avoid missing bags and damaging filter bags.

5. Technical requirements for installation of dust remover: it is suggested that two people should install the bag. One person will study the folding mode of the cloth bag longitudinally and send it into the hole of the pattern plate. On the other hand, an individual can grasp and open the rolled filter bag. Cage frame should be aligned with a center, gently put in, to ensure the enterprise vertical when installing.

a duster

6. Dust collector installation inspection: each time a cloth bag is installed, check whether the joint is sealed and whether the sealing position is correct. Check whether it is vertical from the ash hopper. If there is any collision or error at the bottom of the bag, record it in time under the guidance of personnel straightening.

Figure 7. Gradually cover the finished ceiling with canvas to prevent debris from falling into the bag. When installing the nozzle, cover the ceiling with canvas to prevent bag damage.

As shown in Fig. 8, special attention should be paid during the installation process: five jet hole center members, one venturi nozzle, bag frame, filter and plate taking should be consistent, and the deviation should be less than 2mm.

9. When handling and storing the dust remover, attention should be paid to prevent the bag from contacting with the surrounding hard objects and sharp objects. Do not step on or press heavily to avoid damage.